سعر جيد  الانترنت

تفاصيل المنتجات

المنزل > المنتجات >
Dedicated EDI Module
>
EIMD-10SP Dedicated Electrodeionization Module Resilient to Water Quality Fluctuations

EIMD-10SP Dedicated Electrodeionization Module Resilient to Water Quality Fluctuations

الاسم التجاري: Aquacells
رقم الطراز: EIMD-10SP
معلومات مفصلة
مكان المنشأ:
الصين
إصدار الشهادات:
FDA,EU,CE,RoHS,REACH
يدعم:
دعم فني 24/7 وتحديثات منتظمة
امتثال:
يفي بمعايير الامتثال لتبادل البيانات الإلكترونية (EDI) في الصناعة
حماية:
تشفير البيانات ونقلها بشكل آمن
قابلية التوسع:
يدعم أحجام المعاملات الصغيرة إلى مستوى المؤسسة
معالجة الأخطاء:
التنبيهات في الوقت الحقيقي وأدوات تصحيح الأخطاء
واجهة المستخدم:
لوحة تحكم على شبكة الإنترنت للمراقبة والإدارة
يكتب:
وحدة البرمجيات
التخصيص:
رسم الخرائط وسير العمل شكلي
اسم المنتج:
وحدة EDI مخصصة
اندماج:
التكامل السلس مع أنظمة تخطيط موارد المؤسسات (ERP) الحالية
ميزات الأتمتة:
الترجمة الآلية للمستندات وتوجيهها
وظيفة:
معالجة تبادل البيانات الإلكترونية (EDI).
إبراز:

Dedicated Electrodeionization Module

,

Water Quality Electrodeionization Module

وصف المنتج
EIMD-10SP Electrodeionization Module with High Recovery Rate Resilient to Water Quality Fluctuations and Low Operating Costs

The Aquacells EIMD-SP module is specifically designed for effluent from single-stage reverse osmosis (RO) systems. This module demonstrates exceptional resilience to water quality fluctuations while significantly reducing both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water
*Voltage required depends on module size
The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.