سعر جيد  الانترنت

تفاصيل المنتجات

المنزل > المنتجات >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

الاسم التجاري: Aquacells
رقم الطراز: EIMD-30SP
معلومات مفصلة
مكان المنشأ:
الصين
إصدار الشهادات:
FDA,EU,CE,RoHS,REACH
التوافق:
متوافق مع أنظمة تخطيط موارد المؤسسات (ERP) الرئيسية
اندماج:
التكامل السلس مع تطبيقات الأعمال الحالية
الدعم والصيانة:
يتضمن تحديثات منتظمة والدعم الفني
قابلية التوسع:
قابلة للتطوير للتعامل مع أحجام المعاملات المتزايدة
معالجة الأخطاء:
كشف الأخطاء والإخطار في الوقت الحقيقي
ميزات الأتمتة:
يدعم المعالجة الآلية للبيانات ونقلها
يكتب:
وحدة البرمجيات
اسم المنتج:
وحدة EDI مخصصة
غاية:
تكامل تبادل البيانات الإلكترونية (EDI).
التخصيص:
قواعد رسم الخرائط والترجمة شكلي
واجهة المستخدم:
لوحة تحكم على شبكة الإنترنت للمراقبة والإدارة
إبراز:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

وصف المنتج
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.