ราคาดี  ออนไลน์

รายละเอียดสินค้า

บ้าน > ผลิตภัณฑ์ >
High Temperature EDI Module
>
Condensate Polishing Electrodeionization Module Water Treatment 90-95% High Recovery Rate

Condensate Polishing Electrodeionization Module Water Treatment 90-95% High Recovery Rate

ชื่อแบรนด์: Aquacells
เลขรุ่น: EIMD-30CP
ข้อมูลรายละเอียด
สถานที่กำเนิด:
จีน
ได้รับการรับรอง:
FDA,EU,CE,RoHS,REACH
คุณภาพน้ำทางออก:
น้ำบริสุทธิ์พิเศษที่มีค่าการนำไฟฟ้า < 0.1 µS/cm
ช่วงอุณหภูมิในการทำงาน:
สูงถึง 120 °C
ประเภทการติดตั้ง:
ติดตั้งแบบอินไลน์หรือแบบลื่นไถล
แรงดันสูงสุด:
10 บาร์
ช่วงการนำไฟฟ้า:
0.1 - 10 µS/ซม
ชื่อสินค้า:
โมดูล EDI อุณหภูมิสูง
การใช้พลังงาน:
50 วัตต์
น้ำหนัก:
12 กก
ช่วงพีเอช:
3 - 11
อัตราการไหล:
0.5 - 5 ลบ.ม./ชม
คุณภาพของน้ําเข้า:
น้ำป้อนที่มีค่าการนำไฟฟ้า < 1000 µS/cm
ประเภทเมมเบรน:
เมมเบรนแลกเปลี่ยนไอออนทนอุณหภูมิสูง
ขนาด:
500 x 200 x 150 มม
ช่วงเวลาการบำรุงรักษา:
ทุก ๆ 12 เดือน
วัสดุ:
สแตนเลสและโพลีเมอร์ที่มีอุณหภูมิสูง
เน้น:

Condensate Polishing Electrodeionization Module

,

Electrodeionization Module Water Treatment

,

Condensate Polishing Electrodeionization Water Treatment

คําอธิบายสินค้า
EIMD-30CP Condensate Polishing Module with 16 MΩ*cm Resistivity Using Continuous Electrodeionization for 90-95% Recovery
EIMD-CP Modules

The Aquacells EIMD-CP module is developed to replace mixed bed technology for condensate polishing treatment. The module utilizes continuous electrodeionization (EDI) technology to produce water with a resistivity exceeding 16 MΩ*cm without the need for shutdown and regeneration.

Feed Water Specifications
Feed Water Source Condensate water
Temperature 60-65 ℃ (140-149 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Fe <0.01 ppm
pH 4-11
Oil <0.2 ppm
Typical Module Performance
Typical Recovery 90-95%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 65 ℃ (149 ℉)
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >16 MΩ·cm

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.
สินค้าที่เกี่ยวข้อง