İyi bir fiyat.  çevrimiçi

Ürün ayrıntıları

Evde > Ürünler >
UPW Integrated System
>
Ultrapure Water UPW Water Treatment Integrated System High Recovery Rate

Ultrapure Water UPW Water Treatment Integrated System High Recovery Rate

Marka Adı: Aquacells
Model Numarası: UPW Entegre Sistem
Ayrıntılı Bilgiler
Menşe yeri:
Çin
Sertifika:
FDA,EU,CE,RoHS,REACH
Kontrol Sistemi:
Dokunmatik Ekran Arayüzlü PLC
Çalışma Basıncı:
0,2 ila 0,6 MPa
Su geri kazanım oranı:
%75'e kadar
Otomasyon seviyesi:
Uzaktan izleme ile tam otomatik
Güç kaynağı:
220V/380V, 50/60Hz
Sertifikalar:
ISO 9001, CE, RoHS
Ürün adı:
UPW Entegre Sistem
Bakım aralığı:
Her 6 ayda bir veya 5000 çalışma saatinde bir
Başvuru:
Yarı iletken imalat, ilaç ve elektronik endüstrileri
Dahil Edilen Bileşenler:
Ön arıtma, ters ozmoz, UV sterilizasyonu, ultrafiltrasyon, iyon değişimi, son filtreleme
Sistem türü:
Ultra Saf Su (UPW) Arıtma
Boyutlar:
Kapasiteye göre özelleştirilebilir
Akış Hızı:
Saatte 1000 litreye kadar
Saflık Seviyesi:
18,2 MΩ·cm direnç
Malzeme:
316L paslanmaz çelik ve yüksek dereceli polimerler
Vurgulamak:

UPW Water Treatment Integrated System

,

Ultrapure Water UPW Water Treatment

,

Ultrapure Water UPW Integrated System

Ürün Tanımı
UPW Integrated System With 90-95% Recovery >16MΩ*Cm Resistivity And 90-99% Silica Removal
Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 45 µS/cm
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery 90-95%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >16 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water
*Voltage required depends on module size
The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.
İlişkili Ürünler