Giá tốt.  trực tuyến

Chi tiết sản phẩm

Nhà > các sản phẩm >
UPW Integrated System
>
Ultrapure Water UPW Water Treatment Integrated System High Recovery Rate

Ultrapure Water UPW Water Treatment Integrated System High Recovery Rate

Tên thương hiệu: Aquacells
Số mẫu: Hệ thống tích hợp UPW
Thông tin chi tiết
Nguồn gốc:
Trung Quốc
Chứng nhận:
FDA,EU,CE,RoHS,REACH
Hệ thống điều khiển:
PLC với giao diện màn hình cảm ứng
Áp suất vận hành:
0,2 đến 0,6 MPa
tỷ lệ thu hồi nước:
Lên tới 75%
Mức độ tự động hóa:
Hoàn toàn tự động với giám sát từ xa
Nguồn điện:
220V/380V, 50/60Hz
Chứng chỉ:
ISO 9001, CE, RoHS
Tên sản phẩm:
Hệ thống tích hợp UPW
Khoảng thời gian bảo trì:
Cứ sau 6 tháng hoặc 5000 giờ hoạt động
Ứng dụng:
Công nghiệp sản xuất chất bán dẫn, dược phẩm và điện tử
Các thành phần đi kèm:
Tiền xử lý, thẩm thấu ngược, khử trùng bằng tia cực tím, siêu lọc, trao đổi ion, lọc cuối cùng
Loại hệ thống:
Xử lý nước siêu tinh khiết (UPW)
Kích thước:
Tùy chỉnh dựa trên năng lực
Tốc độ dòng chảy:
Lên đến 1000 lít mỗi giờ
Mức độ tinh khiết:
Điện trở suất 18,2 MΩ·cm
Vật liệu:
Thép không gỉ 316L và polyme cao cấp
Làm nổi bật:

UPW Water Treatment Integrated System

,

Ultrapure Water UPW Water Treatment

,

Ultrapure Water UPW Integrated System

Mô tả sản phẩm
UPW Integrated System With 90-95% Recovery >16MΩ*Cm Resistivity And 90-99% Silica Removal
Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 45 µS/cm
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery 90-95%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >16 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water
*Voltage required depends on module size
The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.
Sản phẩm liên quan