Goede prijs  online

details van de producten

Huis > Producten >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

Merknaam: Aquacells
Modelnummer: EIMD-30SP
Detailinformatie
Plaats van herkomst:
China
Certificering:
FDA,EU,CE,RoHS,REACH
Verenigbaarheid:
Compatibel met de belangrijkste ERP-systemen
Integratie:
Naadloze integratie met bestaande bedrijfsapplicaties
Ondersteuning en onderhoud:
Inclusief regelmatige updates en technische ondersteuning
Schaalbaarheid:
Schaalbaar om de toenemende transactievolumes aan te kunnen
Foutbeheer:
Realtime foutdetectie en -melding
Automatiseringsfuncties:
Ondersteunt geautomatiseerde gegevensverwerking en -overdracht
Type:
Softwaremodule
Productnaam:
Speciale EDI-module
Doel:
Elektronische gegevensuitwisseling (EDI)-integratie
Maatwerk:
Configureerbare toewijzings- en vertaalregels
Gebruikersinterface:
Webgebaseerd dashboard voor monitoring en beheer
Markeren:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

Productomschrijving
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.