Buen precio  en línea

Detalles de los productos

Hogar > Productos >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

Nombre De La Marca: Aquacells
Número De Modelo: EIMD-30SP
Información detallada
Lugar de origen:
Porcelana
Certificación:
FDA,EU,CE,RoHS,REACH
Compatibilidad:
Compatible con los principales sistemas ERP
Integración:
Integración perfecta con aplicaciones empresariales existentes
Apoyo y mantenimiento:
Incluye actualizaciones periódicas y soporte técnico.
Escalabilidad:
Escalable para manejar volúmenes de transacciones crecientes
Manejo de errores:
Detección y notificación de errores en tiempo real
Características de automatización:
Admite el procesamiento y la transmisión automatizados de datos
Tipo:
Módulo de software
Nombre del producto:
Módulo EDI dedicado
Objetivo:
Integración de intercambio electrónico de datos (EDI)
Personalización:
Reglas de traducción y mapeo configurables
Interfaz de usuario:
Panel de control basado en web para seguimiento y gestión
Resaltar:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

Descripción de producto
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.