ราคาดี  ออนไลน์

รายละเอียดสินค้า

บ้าน > ผลิตภัณฑ์ >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

ชื่อแบรนด์: Aquacells
เลขรุ่น: EIMD-30SP
ข้อมูลรายละเอียด
สถานที่กำเนิด:
จีน
ได้รับการรับรอง:
FDA,EU,CE,RoHS,REACH
ความเข้ากันได้:
เข้ากันได้กับระบบ ERP ที่สำคัญ
บูรณาการ:
บูรณาการอย่างราบรื่นกับแอปพลิเคชันทางธุรกิจที่มีอยู่
การสนับสนุนและการบำรุงรักษา:
รวมถึงการอัปเดตและการสนับสนุนทางเทคนิคเป็นประจำ
ความยืดหยุ่น:
สามารถปรับขนาดได้เพื่อรองรับปริมาณธุรกรรมที่เพิ่มขึ้น
การจัดการข้อผิดพลาด:
การตรวจจับและแจ้งเตือนข้อผิดพลาดแบบเรียลไทม์
คุณสมบัติระบบอัตโนมัติ:
รองรับการประมวลผลและการส่งข้อมูลอัตโนมัติ
พิมพ์:
โมดูลซอฟต์แวร์
ชื่อสินค้า:
โมดูล EDI เฉพาะทาง
วัตถุประสงค์:
บูรณาการการแลกเปลี่ยนข้อมูลทางอิเล็กทรอนิกส์ (EDI)
การปรับแต่ง:
กฎการทำแผนที่และการแปลที่กำหนดค่าได้
อินเตอร์เฟซผู้ใช้:
แดชบอร์ดบนเว็บสำหรับการตรวจสอบและการจัดการ
เน้น:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

คําอธิบายสินค้า
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.
สินค้าที่เกี่ยวข้อง