Harga yang bagus  on line

rincian produk

Rumah > Produk >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

Nama merek: Aquacells
Nomor Model: EIMD-30SP
Informasi Rinci
Tempat asal:
Cina
Sertifikasi:
FDA,EU,CE,RoHS,REACH
Kesesuaian:
Kompatibel dengan sistem ERP utama
Integrasi:
Integrasi yang mulus dengan aplikasi bisnis yang ada
Dukungan dan Pemeliharaan:
Termasuk pembaruan rutin dan dukungan teknis
Skalabilitas:
Dapat diskalakan untuk menangani peningkatan volume transaksi
Penanganan Kesalahan:
Deteksi dan pemberitahuan kesalahan waktu nyata
Fitur Otomasi:
Mendukung pemrosesan dan transmisi data otomatis
Jenis:
Modul Perangkat Lunak
Nama Produk:
Modul EDI Khusus
Tujuan:
Integrasi Pertukaran Data Elektronik (EDI).
Kustomisasi:
Aturan pemetaan dan terjemahan yang dapat dikonfigurasi
antarmuka pengguna:
Dasbor berbasis web untuk pemantauan dan pengelolaan
Menyoroti:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

Deskripsi Produk
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.