良い値段  オンライン

商品の詳細

ホーム > 製品 >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

ブランド名: Aquacells
モデル番号: EIMD-30SP
詳細情報
起源の場所:
中国
証明:
FDA,EU,CE,RoHS,REACH
互換性:
主要なERPシステムに対応
統合:
既存のビジネス アプリケーションとのシームレスな統合
サポート と 維持:
定期的なアップデートとテクニカルサポートが含まれます
スケーラビリティ:
増加するトランザクション量に対応できる拡張性
エラー処理:
リアルタイムのエラー検出と通知
自動化機能:
自動化されたデータ処理と送信をサポート
タイプ:
ソフトウェアモジュール
製品名:
専用EDIモジュール
目的:
電子データ交換 (EDI) の統合
カスタマイズ:
構成可能なマッピングと変換ルール
ユーザーインターフェース:
監視と管理のための Web ベースのダッシュボード
ハイライト:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

製品の説明
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.