좋은 가격  온라인으로

제품 세부 정보

> 상품 >
Dedicated EDI Module
>
High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

High Recovery Rate Electrodeionization Module For Reverse Osmosis RO System

브랜드 이름: Aquacells
모델 번호: EIMD-30SP
상세 정보
원래 장소:
중국
인증:
FDA,EU,CE,RoHS,REACH
호환성:
주요 ERP 시스템과 호환
완성:
기존 비즈니스 애플리케이션과의 원활한 통합
지원 및 유지 관리:
정기적인 업데이트 및 기술 지원이 포함됩니다.
확장 성:
증가하는 거래량을 처리할 수 있도록 확장 가능
오류 처리:
실시간 오류 감지 및 알림
자동화 기능:
자동화된 데이터 처리 및 전송 지원
유형:
소프트웨어 모듈
제품명:
전용 EDI 모듈
목적:
전자 데이터 교환(EDI) 통합
맞춤화:
구성 가능한 매핑 및 변환 규칙
사용자 인터페이스:
모니터링 및 관리를 위한 웹 기반 대시보드
강조하다:

High Recovery Electrodeionization Module

,

RO System Electrodeionization Module

제품 설명
EIMD-30SP Electrodeionization Module With High Recovery Rate Resilient To Water Quality Fluctuations And Low Operating Costs

High recovery rate electrodeionization module resilient to water quality fluctuations with low operating costs.

EIMD-SP Modules Overview

The Aquacells EIMD-SP module is tailor-made for the effluent from a single-stage reverse osmosis (RO) system. It demonstrates resilience to fluctuations in water quality and significantly reduces both investment and operating costs.

Feed Water Specifications
Parameter Specification
FCE (including CO2 and Silica) < 80 µS/cm
Feed Water Source Condensate water
Temperature 5-45 ℃ (40-113 ℉)
Feed pressure 1.4-7 bar (20-100 psi)
Total Chlorine (as CI2) <0.05 ppm
Fe <0.01 ppm
Mn <0.01 ppm
S2- <0.01 ppm
pH 4-11
Total Hardness (as CaCO3) <1.0 ppm
Dissolved Organics (TOC as C) <0.5 ppm
Silica (SiO2) <1.0 ppm
Typical Module Performance
Parameter Specification
Typical Recovery >85%
Maximum Feed Pressure 7 bar (100 psi)
Maximum Feed Temperature 45 ℃ (113 ℉)
Minimum Discharge pressure > 1 bar
DC Voltage* 0-300 V
DC Amperage 0-6 A
Product Resistivity >10 MΩ·cm
Silica (SiO2) Removal 90-99% depending on feed water

*Voltage required depends on module size

The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.